+1 (702) 970 6666
info@jnlmesse.com​​
Trade Show Booth Material
Chifeng International Convention and Exhibition Center
Specifications and Requirements for Standard Exhibition Booth Procurement
​
Detailed Description of Main Technical Specifications, Parameters, and Performance
Materials & Technical Specifications
01
Project Name
Aluminum Alloy Profile
-
The performance of aluminum alloy profiles must comply with the GB/T5237-2008 standard.
-
Material grade must not be lower than 6063 T5 aluminum alloy.
-
Profile dimensions must meet the ultra-high precision level as defined by national standards, including:
-
Permissible deviations in cross-sectional size
-
Angular deviations
-
Surface and curved plane gaps
-
Straightness and torsion
-
Length deviations
-
End cut angle and deformation tolerances
-
Radius corner tolerances
-
-
Mechanical properties must meet F25 strength grade, with tensile strength ≥ 215 N/mm² and hardness (Vickers) ≥ 75 HV.
-
Surface quality: The anodized film must reach AA15 grade (minimum average film thickness ≥ 15μm, minimum localized thickness ≥ 12μm).
-
Slot width standard: 4.3 + 0.3 mm
-
Octagonal tube cross-section: 40 ± 0.2 mm
-
Flat aluminum cross-section: 50 ± 0.2 mm
-
Wall thickness: 2.0 ± 0.15 mm
-
​
Heat Transfer Printed Fabric Graphics
-
High-quality flame-retardant fabric is selected, with a weight of 200–260g per square meter.
-
Printers and ink are sourced from top international brands.
-
After printing, graphics are processed at approximately 210°C (400T) using professional machinery. The heat causes the dye on the transfer paper to sublimate and fuse into the fabric, resulting in vivid, high-resolution visuals.
02
Project Name
03
Project Name
This is your Project description. Provide a brief summary to help visitors understand the context and background of your work. Click on "Edit Text" or double click on the text box to start.
04
Project Name
This is your Project description. Provide a brief summary to help visitors understand the context and background of your work. Click on "Edit Text" or double click on the text box to start.
